Miller XR-15W Kullanıcı El Kitabı - Sayfa 10
Kaynak Sistemi Miller XR-15W için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Miller XR-15W 36 sayfaları. With quick disconnect ce, 200/400 ampere air/water push-pull welding gun
Sayfayı Yazdır
4-1. Gun Specifications
Model
Welding Output Range
XR-A − 15 and 30 ft
200 A at 100% Duty Cycle
(4.6 or 9.1 m) gun
250 A at 60% Duty Cycle
(Air Cooled)
XR-W − 15 and 30 ft
400 A at 100% Duty Cycle
(4.6 or 9.1 m) gun
(Water Cooled)
4-2. Duty Cycle And Overheating
100% Duty Cycle At 200 Amperes Using Argon
Continuous Welding
4-3. Environmental Specifications
A. Information On Electromagnetic Fields (EMF)
!
This equipment shall not be used by the general public as the EMF limits for the general public might be exceeded during welding.
This equipment is built in accordance with EN 60974−1 and is intended to be used only in an occupational environment (where the general public
access is prohibited or regulated in such a way as to be similar to occupational use) by an expert or an instructed person.
Wire feeders and ancillary equipment (such as torches, liquid cooling systems and arc striking and stabilizing devices) as part of the welding
circuit may not be a major contributor to the EMF. See the Owner's Manuals for all components of the welding circuit for additional EMF exposure
information.
S
The EMF assessment on this equipment was conducted at 0.5 meter.
S
At a distance of 1 meter the EMF exposure values were less than 20% of the permissible values.
B. Temperature Specifications
Operating Temperature Range
14 to 104 °F (−10 to 40°C)
OM-236297 Page 6
SECTION 4 − SPECIFICATIONS
Air-Cooled Models
Water-Cooled Models
100% Duty Cycle At 400 Amperes Using Argon
Continuous Welding
Electrode
Wire Feed
Wire Diameter
Speed Range
Capacity
.030 To 1/16 in.
70 To 900 ipm
(0.8 To 1.6 mm)
(1.8 To 23 mpm)
aluminum wire
.030 To 1/16 in.
70 To 900 ipm
(0.8 To 1.6 mm)
(1.8 To 23 mpm)
aluminum wire
60% Duty Cycle At 250 Amperes Using Argon
6 Minutes Welding
Storage Temperature Range
−4 to 131 °F (−20 to 55°C)
Net Weight
(Torch Only)
2.2 lb (1 kg)
(less cables)
2.4 lb (1.08 kg)
(less cables)
Duty Cycle is percentage of 10 min-
utes that unit can weld at rated load
without overheating.
NOTICE − Exceeding duty cycle
can damage unit and void warranty.
4 Minutes Resting
sduty1 5/95
ce-emf 1 2010-10
Temp_2016- 07