Miller XR-W AlumaPro Plus 25 ft Kullanıcı El Kitabı - Sayfa 12
Kaynak Sistemi Miller XR-W AlumaPro Plus 25 ft için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Miller XR-W AlumaPro Plus 25 ft 36 sayfaları. Ce and non-ce models air and water-cooled guns; 250 ampere (air) push-pull; 300 ampere (air) push-pull; 400 ampere (water) push-pull
Sayfayı Yazdır
.
Be sure that contact tip, liner, and drive rolls are correct for wire size and type. See Parts List to change parts as needed.
5-1. Equipment Connection Diagram - Single Feeder
2
3
4
5
6
OM-245892 Page 8
SECTION 5 − INSTALLATION
1
10
1
Welding Power Source
2
Contactor Control/Power Cord
3
Positive (+) Weld Cable
4
Negative (−) Weld Cable
5
Workpiece
6
Welding Gun
7
Wire Feeder
8
Gas Hose
9
Gas Cylinder and Regulator
(Customer Supplied)
.
Shielding gas pressure not to
exceed 100 PSI (689 kPa).
10 Coolant Hoses - Water−
cooled Guns Only
9
7
246 040-A
8