Miller ArcStation 60SX Kullanıcı El Kitabı - Sayfa 11
Kaynak Aksesuarları Miller ArcStation 60SX için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Miller ArcStation 60SX 16 sayfaları.
Sayfayı Yazdır
E. Connecting Center And End Subframes To Rails And Installing Leveling Feet
AA and ZZ
2
3
1
2
1
Center Subframe
2
End Subframes
Use 16 bolts AA and 16 locknuts ZZ
at each angle bracket as shown to
connect center and end subframes
and rails.
Tighten all bolts and locknuts.
3
Leveling Foot
Install six leveling feet to bottom of
leg assembly tubes.
Do not tighten leveling feet at this
time.
Tools Needed:
1/2 in.
hex bit 3/16 in.
OM-244997 Page 7