Miller Infinity Series Kullanıcı El Kitabı - Sayfa 8
Kaynak Aksesuarları Miller Infinity Series için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Miller Infinity Series 32 sayfaları. Auto-darkening helmets
Ayrıca Miller Infinity Series için: Kullanıcı El Kitabı (32 sayfalar)
Sayfayı Yazdır
SECTION 3 – SPECIFICATIONS
�
Please register your product at
Specification
Viewing Field
Reaction Time
Available Shades
All Shades Provide
Continuous UV And
IR Protection.
Sensitivity Control
Delay Control
Automatic Power Off
Low Battery Light
Power Supply
Sensors
Operating
Temperature
Storage Temperature
Total Weight
Standards
Warranty
OM-269681 Page 6
www.MillerWelds.com/Support/Registration
Digital Infinity Helmet
4.4 x 3.1 in (112 x 78 mm)
0.0000500 sec (1/20,000)
Weld Mode Darkened State: No. 8 - No. 13 Light State: No. 3
Cut Mode Darkened State: No. 5 - No. 8 Light State: No. 3
Grind Mode Light State: No. 3
X-Mode Darkened State: No. 8 - No. 13 Light State: No. 3
Adjustable For Varying Ambient Light And Welding Arc
Slows Lens Dark-To-Light State Between 0.1 And 1.0 Seconds
Shuts Lens Off 45 Minutes After Last Arc Is Struck
Red Led Illuminates To Indicate 2-3 Days Remaining Battery Life
Panasonic CR2450 Lithium Batteries (Miller Part No. 217043)
Independent/Redundant (Four)
14°F to 131°F / -10°C to +55°C
☞ When Stored In Extremely Cold Temperatures, Warm Helmet To
Ambient Temperature Before Welding.
-4°F to 158°F / -20°C to +70°C
☞ When Stored In Extremely Cold Temperatures, Warm Helmet To
Ambient Temperature Before Welding.
23 oz (650 g)
Meets ANSI Z87.1+ And CSA Z94.3 Standards
Three Years From Date Of Purchase (Section 12)