Miller MIGmatic M-25 Kullanıcı El Kitabı - Sayfa 3
Kaynak Aksesuarları Miller MIGmatic M-25 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Miller MIGmatic M-25 8 sayfaları. Air-cooled guns for gmaw and fcaw welding
Ayrıca Miller MIGmatic M-25 için: Kullanıcı El Kitabı (20 sayfalar), Kullanıcı El Kitabı (12 sayfalar)
Sayfayı Yazdır
5.
Removing Nozzle, Contact Tip, And Adapter, Changing Liner, And Cleaning Gun
Casing
1
2
3
3/8 in
Lay
gun
cable
out
straight before installing
new liner.
Liner
Stickout
Tools Needed:
3/8 in (7/16 in for M-25 and M-25M)
Head
Tube
Remove nozzle,
contact tip, and
adapter.
Unscrew and
remove liner.
3/4 in
(20 mm)
Y Turn off welding power
source/wire feeder.
1
Nozzle
2
Contact Tip
3
Adapter
.
Wire size stamped on tip –
check and match wire size.
Cut off wire and disconnect
gun from feeder.
Reassemble gun in
reverse order from
taking it apart.
.
Thread wire according to
welding power source/wire
feeder manual.
Blow out
gun casing.
Install
Liner
Ref. ST-800 797-C
OM-1035 Page 3