Miller PAPR Manuel - Sayfa 27

Kaynak Aksesuarları Miller PAPR için çevrimiçi göz atın veya pdf Manuel indirin. Miller PAPR 40 sayfaları. Auto-darkening helmets

Sayfayı Yazdır

3-8. Replacing The Lens Covers On Standard Elite Helmets

Be sure flat side of gasket

faces lens cover holder.

AUTO-DARKENING HELMET

Never use the auto-dark-

ening lens without the in-

side and outside lens

covers properly installed.

Welding spatter will dam-

age the auto-darkening

lens

warranty.

Front Lens Gasket

Outside Lens Cover

Lens Assembly

Inside Lens Cover

Lens Frame

Remove the lens assembly to

remove either lens cover.

To remove the lens assembly,

push down on the helmet bot-

tom retaining arms and push the

retaining clips toward the out-

side of the helmet. Lift up on the

assembly and pull free of the

helmet.

Outside Lens Cover

Remove the outside lens cover

by pushing into the helmet. Re-

move the rubber lens gasket

and install on the new lens cov-

er. Reinstall the lens assembly.

Be sure the flat side of lens

cover gasket faces the lens

cover holder.

Inside Lens Cover

To replace the inside lens cover,

remove the lens assembly from

the lens frame by pushing up on

the top two retaining tabs while

gently pushing the lens free.

Remove the lens cover by slid-

ing it out of either side. Replace

with the new cover lens and re-

install the assembly in the

helmet.

and

void

the

Ref. 804 109

OM-235 936 Page 25