Miller RFCS-6M Kullanıcı El Kitabı - Sayfa 8
Kaynak Aksesuarları Miller RFCS-6M için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Miller RFCS-6M 16 sayfaları. Foot controls
Ayrıca Miller RFCS-6M için: Kullanıcı El Kitabı (12 sayfalar), Kullanıcı El Kitabı (16 sayfalar)
Sayfayı Yazdır
1-5. Remote Amperage Control For Welding Power Source With Remote Control Switch
And Output (Contactor) Control
Example Of Combination Front Panel
And Remote Amperage Control
.
See welding power source
Owner's Manual to determine
if Remote Foot Control works
as a combination or as full Am-
perage control.
Set Switch
Example Of Full Remote Amperage Control
.
See welding power source
Owner's Manual to determine
if Remote Foot Control works
as a combination or as full Am-
perage control.
Set Switch
OM-844 Page 4
Set Switch
Control Setting
Set Switch
Does Not Matter
Set Control
Off
0
On
Control
Setting
(150 A)
Combination Front Panel
And
Remote Control
Press pedal lightly to turn weld
output and gas flow on. Press
pedal further to increase weld
output. Release pedal to turn
off weld output and gas flow.
Off
0
On
Unit
Maximum
Press pedal lightly to turn weld
output and gas flow on. Press
pedal further to increase weld
output. Release pedal to turn
off weld output and gas flow.
Ref. 217264-G / Ref. 801736