Miller T94i Series Manuel - Sayfa 22

Kaynak Aksesuarları Miller T94i Series için çevrimiçi göz atın veya pdf Manuel indirin. Miller T94i Series 32 sayfaları. Auto-darkening helmets
Ayrıca Miller T94i Series için: Kullanıcı El Kitabı (40 sayfalar)

Sayfayı Yazdır

SECTION 6 − REPLACING THE GRINDING SHIELD OR

6-1. Replacing Grinding Shield On T94i Helmet

OM-255503 Page 20

LENS COVERS

Never use the auto-dark-

ening lens without the in-

side and outside lens

covers properly installed.

Welding spatter will dam-

age the auto-darkening

lens

warranty.

Grinding Shield

Retaining Clip

Tab

Rotate both retaining clips to the

Open position.

Gently push shield toward bot-

tom tab and remove shield from

helmet.

Remove retaining clips from

shield. Install clips in same loca-

tion on new shield. (Retaining

clips are not interchangeable.)

Install new shield in helmet and

rotate clips to the Lock position.

Tear-Away Protective Sheets

Tear-away sheets are available

to prolong the life of the grinding

shield (see Parts List).

To install tear-away sheets, pull

backing from both sides of the

tear-away, remove white ad-

hesive backing strips, and

place on clear shield.

and

void

the

260483-7