Miller Blue Star 185 Başvuru Kılavuzu - Sayfa 12

Taşınabilir Jeneratör Miller Blue Star 185 için çevrimiçi göz atın veya pdf Başvuru Kılavuzu indirin. Miller Blue Star 185 16 sayfaları. Generator power
Ayrıca Miller Blue Star 185 için: Manuel (4 sayfalar)

Sayfayı Yazdır

10. Typical Connections To Supply Standby Power

Utility

Electrical

Service

Y Have only qualified per-

sons

perform

connections according

to all applicable codes

and safety practices.

Y Properly

install

ground this equipment

according to its Own-

er's Manual and nation-

al,

state,

and

codes.

Customer-supplied equip-

ment is required if genera-

tor will supply standby

power during emergen-

cies or power outages.

1 Utility Electrical Service

2 Transfer Switch

(Double-Throw)

Switch transfers the electrical

Page 8

Y Properly install and ground this equipment according to

its Owner's Manual and national, state, and local codes.

Transfer Switch

Essential

Loads

load from electric utility ser-

these

vice to the generator. Transfer

load back to electric utility

when service is restored.

Install correct switch (custom-

and

er-supplied). Switch rating

must be same as or greater

than the branch overcurrent

protection.

local

3 Fused Disconnect Switch

Install correct switch (custom-

er-supplied) if required by

electrical code.

4 Welding Generator Output

Generator output voltage and

wiring must be consistent with

regular (utility) system voltage

and wiring.

Fused

Disconnect

Switch

(If Required)

Connect generator with tem-

porary or permanent wiring

suitable for the installation.

Turn off or unplug all equip-

ment connected to generator

before starting or stopping en-

gine. When starting or stop-

ping, the engine has low speed

which causes low voltage and

frequency.

5 Essential Loads

Generator output may not

meet the electrical require-

ments of the premises. If gen-

erator does

enough output to meet all re-

quirements, connect only es-

sential loads (pumps, freez-

ers, heaters,etc. − See Sec-

tion 2).

Welding

Generator

Output

not produce