DIAMO ONE Kullanıcı Kılavuzu - Sayfa 12

Kahve Makinesi DIAMO ONE için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DIAMO ONE 20 sayfaları.

Adjusting for Hard Water

If you have soft, medium, or hard water, you must

adjust your Diamo One to compensate for the water's

level of hardness. Consult the table below to find out

what level of hardness your water has.

Water Type

U.S.

German

French

Power off the Diamo One

IMPORTANT:

is off and the Power button LED is dark. If you try to set the

HARD option below with the power ON, you will start the

descaling process instead.

Choose one of the following:

For SOFT water, press and HOLD the Power button

and the Single (Espresso) button at the same

time. When the Single button flashes three times,

you're done.

For MEDIUM water, press and HOLD the Power

button and the Double (Lungo) button at the

same time. When the Double button flashes three

times, you're done.

For HARD water, press and HOLD the Power button

and the Steam button at the same time. When the

Steam button flashes three times, you're done.

Soft Water

<180 ppm CaCO

<10° dH

<18° fH

Do not go to the next step until the Diamo One

Medium Water

180-360 ppm CaCO

10-20° dH

18-36° fH

(see Turning Off instructions)

Hard Water

>360 ppm CaCO

>20° dH

>36° fH