Miller Subarc DC 1000 Kullanıcı El Kitabı - Sayfa 33

Taşınabilir Jeneratör Miller Subarc DC 1000 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Miller Subarc DC 1000 48 sayfaları.

4-2. Front Panel Controls (CE Models)

Output Control Switch

For weld output, place switch in On position.

For remote control of output, make connec-

tions to terminal strip TE3 or Remote 14 re-

ceptacle (see Section 2-10) and place switch

in Remote position.

A/V (Amperage/Voltage) Control Switch

For front panel control, place switch in Panel

position and use the A/V Adjust control.

Y Turn Off power before connecting re-

mote device.

For remote control, connect remote device to

terminal strip TE3 or Remote 14 receptacle,

and place switch in Remote position. Remote

control provides full range of unit output re-

gardless of A/V Adjust control setting

Pilot Light

Power Push Button Switch

The fan motor is thermostatically

controlled and only runs when cooling is

needed.

High Temperature Shutdown Light

Lights if welding power source overheats.

A/V (Amperage/Voltage) Adjustment

Control

Use control to select weld voltage or amper-

age. Control may be adjusted while welding.

Numbers on scale are for reference only.

CC/CV Switch (Mounted Inside Access

Area)

Place switch in desired position.

Y Turn Off welding power

source before opening ac-

cess door to change switch

position.

Ref. ST-175 086 / Ref. ST-801 882-A

OM-2221 Page 29