Miller Elite Series Kullanıcı El Kitabı - Sayfa 19

Motosiklet Aksesuarları Miller Elite Series için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Miller Elite Series 32 sayfaları. With external grind button auto-darkening helmets
Ayrıca Miller Elite Series için: Kullanım Talimatı (32 sayfalar), Manuel (20 sayfalar), Kullanıcı El Kitabı (32 sayfalar)

Sayfayı Yazdır

6-3.

Replacing The Lens Covers On Digital Elite Standard Helmets

1-1. Replacing The Lens Covers On Digital Elite Standard Helmets

Never use the auto-darkening lens

without the inside and outside lens

covers properly installed. Welding

spatter will damage the auto-darken-

ing lens and void the warranty.

1 Front Lens Gasket

Never use the auto-

2 Outside Lens Cover

darkening lens with-

3 Lens Assembly Gasket

out the inside and

outside lens covers

4 Lens Assembly

properly

5 Inside Lens Cover

Welding spatter will

6 Lens Frame

damage the auto-dark-

ening lens and void the

Remove the lens assembly to remove either

warranty.

lens cover.

Front Lens Gasket

To remove the lens assembly, push down on

the helmet bottom retaining arms and push

Outside Lens Cover

the retaining clips toward the outside of the

Lens Assembly Gasket

helmet. Lift up on the assembly and pull free

of the helmet.

Lens Assembly

Inside Lens Cover

Lens Frame

Remove the lens assembly

Ref. 805012

to remove either lens cover.

To remove the lens assem-

bly, push down on the helmet

installed.

bottom retaining arms and

push the retaining clips to-

ward the outside of the

helmet. Lift up on the assem-

bly and pull free of the

helmet.

Outside Lens Cover

Remove the outside lens

cover by pushing cover into

the helmet. Remove the rub-

ber lens gasket and install on

the new lens cover. Reinstall

the lens assembly.

Outside Lens Cover

Remove the outside lens cover by pushing

cover into the helmet. Remove the rubber

lens gasket and install on the new lens cov-

er. Reinstall the lens assembly.

�

Be sure wide edge of gasket faces hel-

met shell.

�

Be sure the flat side of lens cover gas-

ket faces the helmet shell.

Inside Lens Cover

To replace the inside lens cover, remove the

lens assembly from the lens frame by push-

ing up on the top two retaining tabs while

gently pushing the lens free.

Remove the lens cover by sliding it out of ei-

ther side. Replace with the new cover lens

and reinstall the assembly in the helmet.

Be sure wide edge of

gasket

faces helmet

shell.

Be sure the flat side of

lens cover gasket faces

the helmet shell.

Inside Lens Cover

To replace the inside lens

cover, remove the lens as-

sembly from the lens frame

by pushing up on the top two

retaining tabs while gently

pushing the lens free.

Remove the lens cover by

sliding it out of either side.

Replace with the new cover

lens and reinstall the assem-

bly in the helmet.

OM-256476 Page 17

OM-256476 Page 1