ABB E-Hub 2.0 Başlarken - Sayfa 12

Endüstriyel Ekipmanlar ABB E-Hub 2.0 için çevrimiçi göz atın veya pdf Başlarken indirin. ABB E-Hub 2.0 18 sayfaları.

E - H U B 2 . 0 G E T T I N G S TA R T E D

With Automatic discovery, Ekip Connect will scan

the whole Modbus network looking for devices to

provision.

With Manual discovery, it is possible either to

provide the list of specific Modbus RTU or IP

addresses or to narrow the scan to a particular

range of addresses.

The Manual discovery is recommended: in the

new Page select "Manual Discovery settings"

Tick on the "Sniff gratuitous ARP packets" box.

Digit in the device IP address of E-Hub 2.0, and

click on plus symbol. Digit for each device

connected via Modbus TCP the device static IP

address and click on plus symbol.

Otherwise, input the IP address range where to

scan those devices. In the slave address drop-

down menu, it is possible to select the addresses

of the slaves connected with Modbus RTU

communication protocol.

Then press "OK"

Select "Start Discovery".

Once the E-Hub 2.0 module has been found, digit

the 16 character password code that you can find

printed on the left side of the devices and press

"Let me in".