Miller Invision 352 MPa Auto-Line CE Kullanıcı El Kitabı - Sayfa 33
İnvertör Miller Invision 352 MPa Auto-Line CE için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Miller Invision 352 MPa Auto-Line CE 44 sayfaları.
Ayrıca Miller Invision 352 MPa Auto-Line CE için: Kullanıcı El Kitabı (48 sayfalar), Kullanıcı El Kitabı (44 sayfalar)
Sayfayı Yazdır
7-3. MIG - Wire and Gas Selection Table
WIRE TYPES**
Steel
Flux Core
Metal Core
Stainless Steel
.035 (0.9) AL4X (4000 Series)
.040 (1.0) AL4X (4000 Series)
3/64 (1.2) AL4X (4000 Series)
1/16 (1.6) AL4X (4000 Series)
Aluminum
.035 (0.9) AL5X (5000 Series)
.040 (1.0) AL5X (5000 Series)
3/64 (1.2) AL5X (5000 Series)
1/16 (1.6) AL5X (5000 Series)
*For self-shielded FCAW wires use the ARGN CO2 gas selection and set inductance to less than 10.
**Wire diameter in inches (mm). Refer to section 6-2 to change displayed units.
Notes
.
A complete Parts List is available at www.MillerWelds.com
.035 (0.9) STL
ARGN CO2 (75 ARGON / 25 CARBON DIOXIDE)
.045 (1.2) STL
.052 (1.4) STL
.035 (0.9) STL
.045 (1.2) STL
.035 (0.9) FCAW
ARGN CO2 (75 ARGON / 25 CARBON DIOXIDE)
.045 (1.2) FCAW
.052 (1.4) FCAW
1/16 (1.6) FCAW
.045 (1.2) MCOR
.052 (1.4) MCOR
ARGN CO2 (90 ARGON / 10 CARBON DIOXIDE)
1/16 (1.6) MCOR
TRI MIX (90 HELIUM / 7.5 ARGON / 2.5 CARBON
.035 (0.9) SSTL
.045 (1.2) SSTL
GAS TYPES
ARGN OXY (98 ARGON / 2 OXYGEN)
CO2 (CARBON DIOXIDE)
*
CO2 (CARBON DIOXIDE)
DIOXIDE)
ARGN OXY (98 ARGON / 2 OXYGEN)
ARGN (ARGON)
DEFAULT INDUCTANCE
30
10
30 *
30
70
10
OM-246193 Page 29