Miller Invision 352 MPa Auto-Line CE Kullanıcı El Kitabı - Sayfa 16

İnvertör Miller Invision 352 MPa Auto-Line CE için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Miller Invision 352 MPa Auto-Line CE 44 sayfaları.
Ayrıca Miller Invision 352 MPa Auto-Line CE için: Kullanıcı El Kitabı (48 sayfalar), Kullanıcı El Kitabı (44 sayfalar)

Sayfayı Yazdır
Miller Invision 352 MPa Auto-Line CE Kullanıcı El Kitabı
Do not weld on drums or any closed containers.
Do not remove or paint over (cover) the label.
Flying pieces of parts can cause injury. Always wear a face shield when servicing unit.
Always wear long sleeves and button your collar when servicing unit.
After taking proper precautions as shown, connect power to unit.
Do not use one handle to lift or support unit.
Environmental Protection Use Period (China)
Kasjf;laksf;lkasdf'l;aksdf;lkasd;flksadflkasd;lk
Kasjf;laksf;lkasdf'l;aksdf;lkasd;flksadflkasd;lk
Kasjf;laksf;lkasdf'l;aksdf;lkasd;flksadflkasd;lk
V
>5min
= < 60°
OM-245171 Page 10
.
A complete Parts List is available at www.MillerWelds.com
V
V
Wear hat and safety glasses. Use ear protection and button shirt
collar. Use welding helmet with correct shade of filter. Wear complete
body protection.
Become trained and read the instructions before working on the
machine or welding.
Hazardous voltage remains on input capacitors after power is turned
off. Do not touch fully charged capacitors. Always wait 5 minutes after
power is turned off before working on unit, AND check input capacitor
voltage, and be sure it is near 0 before touching any parts.
Always lift and support unit using both handles. Keep angle of lifting
device less than 60 degrees.
Use a proper cart to move unit.
Safe16 2017−04
Safe20 2017−04
Safe27 2012−05
Safe28 2012−05
Safe29 2012−05
Safe31 2017−04
Safe123 2016−06
Safe38 2012−05
Safe40 2012−05
Safe43 2017−04
Safe44 2012−05