AQUAPHOR RO-101S Kullanıcı El Kitabı - Sayfa 13

Su Filtrasyon Sistemleri AQUAPHOR RO-101S için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. AQUAPHOR RO-101S 20 sayfaları. Reverse osmosis system
Ayrıca AQUAPHOR RO-101S için: Kullanıcı El Kitabı (20 sayfalar), Kullanıcı El Kitabı (16 sayfalar)

Sayfayı Yazdır
AQUAPHOR RO-101S Kullanıcı El Kitabı

8. Slotted plug installation

Install the slotted plug into the JG tube 3/8" (9.5 mm) tube to a stop, as shown on figure 10.
1.
Remove the clip from the JG tube 3/8" socket of the water filter, and then connect this tube end to it
2.
(see the connection of the JG tubes on figures 6 and 7).
Attention! The set includes three slotted plugs: one for installation and two are for spares.

9. Starting RO

To start RO, you must connect the supply tube and carry out the flushing procedure of filter and membrane
cartridges.
Step 1. Connect the incoming tubes according to the diagram
below (figure 11). The tube connection scheme is illustrated
on figure 6
AQUAPHOR RO-101S, RO-102S
Slotted plug
Figure 10. Slotted plug installation
Figure 11. Incoming tubes connection
13