Burl Audio B2 Bomber DAC Kullanıcı Kılavuzu - Sayfa 16

Medya Dönüştürücü Burl Audio B2 Bomber DAC için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Burl Audio B2 Bomber DAC 17 sayfaları. With dante

Sayfayı Yazdır

CLOCKING B2 BOMBER ADC/DAC TO DANTE

SEE FIGURE 16 (NEXT PAGE) FOR B2 DANTE CLOCKING DIAGRAM:

1. Set B2 to DANTE

2. Open Dante Controller, select DEVICE INFO

3. Double Click on device "B2-xxxxxx"

4. Click on CLOCK STATUS.(Fig. 15, below)

5. Select B2 Bomber as "Preferred Master", Deselect "Enable to sync to

6. Make sure each device including host DAW is set to correct sample rate

Fig. 15: shows B2 ADC on Dante clock., Dante card is Master clock.

External"

in Device Config (as per step 8, page 9)