Aquaport AQP-SFK Kullanıcı Kılavuzu - Sayfa 8

Su Filtrasyon Sistemleri Aquaport AQP-SFK için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Aquaport AQP-SFK 12 sayfaları. Water filter

aCtIVatIng tHe SySteM

Once the Aquaport water purifier is connected, open the faucet before turning on the tap to

displace air inside the filters. Let the water run for at least 5 to 10 minutes to flush the filter of

fines (these particles are harmless). Turn the faucet off and check for leakage. Recheck overnight.

The spout can be rotated through 360˚ for added convenience.

When small amounts of water are required from the faucet, push down or gently pull up on the

faucet handle.

For large amounts of water delivered hands-free from the faucet, pull up on the faucet handle until

it locks into the open position.

tO enSUre tHe PUreSt Water POSSIbLe

Restrict the flow rate to 1-3 litres per minute. If the resulting flow rate is more than 3 litres per

minute, use a flow inhibitor.

We recommend working pressure to be 875kPa.

Flush your purifier for 5-10 seconds each time you use it.

Regularly maintain the filter and purifying cartridges.

If filter is not in use for more than 24 hours, flush filter for a minimum of 1 minute prior to using.

The replacement intervals of the refrigerator filters are dependent on water quality and the

volume of water passing through the filter:

As a general guideline the filters should be changed every 6-12 months.