AquaPRO APB300PRO Kullanıcı El Kitabı - Sayfa 3

Yüzme Havuzu Pompası AquaPRO APB300PRO için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. AquaPRO APB300PRO 12 sayfaları. Aquapro systems swimming pool pump owner's manual

Sayfayı Yazdır

1. Replacement Parts List

Manual del usuario

Para Ordenar Repuestos o Asistencia Técnica, Sírvase

Llamar al Distribuidor Más Cercano a Su Domicilio

Sírvase darnos la siguiente información:

- Número del modelo

- Número de Serie o código con fecha (de haberlo)

- Descripción y número del repuesto según la lista

de repuestos

Dirija toda la correspondencia a:

AquaPRO

Systems

Attn: Customer Service

101 Production Drive

Harrison, OH 45030 U.S.A.

22 Sp

General Safety

Information

or pump house must allow adequate

ventilation to assure the ambient

temperature remains below the motor

rating when the pump is operating.

• Locate pump on a non combustible

surface. The surface should be hard, level,

dry, well ventilated, out of direct sunlight.

The surrounding area should provide

protection from the elements and allow

sufﬁ cient space for maintenance and

service. Ensure the drainage will ﬂ ow

away from the pump. To reduce vibration

and pipe stress, use anchor bolts to

secure pump base to surface. Support the

suction and discharge piping.

• Design the piping system to allow the

pump suction inlet height to be as close

to water level as possible. Mount pump

below water level for easy priming. If the

pump must be located above the ﬁ lled

water level, keep the vertical distance to

a minimum. Use short, direct piping to

the suction this will minimize friction loss.

Fire and burn hazard.

Motors run at high

temperatures. Do not allow leaves, debris,

or foreign matter to collect around the

pump motor. Keep ventilation holes open.

Allow motor to cool before handling. Keep

ﬂ ammable liquids away.

• If the thermal overload protection

in the motor trips or if the GFCI trips

determine the reason and correct the

problem before re-starting pump.

Figure 2

APB075PRO, APB100PRO, APB150PRO, APB200PRO, APB300PRO,

APB100UPRO, APB150UPRO, APB200UPRO and APB250UPRO

• Use rigid or ﬂ exible PVC pipe. Ensure

pipe ends are clean and free of any ﬂ ash

(Cont.)

caused by cutting. Use the proper glue

for the type of pipe selected.

NOTE: Use a supplier recommended

primer to ensure glued joints are secure.

Many local codes require primer with a

purple tracer to verify primer use.

• Consider climatic conditions when

applying adhesives. Atmospheric

conditions with high humidity will

make the adhesive action of certain

glues less effective. Follow the

manufacturer's instructions.

Pool Safety Guidelines

RESPONSIBLE ADULT SUPERVISION

Constant and responsible adult supervi-

sion is mandatory in the pool or spa

environment. Always supervise children

around pools and spas. Never allow a child

to play in a way that could permit the

child's hair to come near the drain cover.

DRAINS, SUCTION FITTINGS, AND JETS

Keep hair and clothing away from the suc-

tion ﬁ tting drain cover. Wear a bathing cap

or pin hair up if you have long hair. Current

grates and covers help prevent body or hair

entrapment. Make sure that drain covers

meet the ANSI/ASME A112.19.8 standard.

Safety doors should be installed in all pool

cleaner wall suction lines. Pools or spas with

drain covers that are broken, missing, or not

adequately secured should not be used until

the proper replacement has been installed.

ELECTRICAL HAZARDS

A licensed electrician, experienced in

swimming pools and spas, should inspect

your equipment to make sure everything is

properly grounded, bonded, and pro-

tected by proper GFCI circuits according to

Article 680 of the National Electric Code.

DROWNING PREVENTION

Install and routinely inspect fences, self-clos-

ing and latching gates, baby barrier fences,

and alarms. Eliminate incidental routes to

pool including machinery or equipment that

provides a route over fencing into pool area.

INDOOR INSTALLATIONS

Pools and spas located indoors must

comply with ANSI/ASHRAE (American

Society of Heating, Refrigeration and

Air-Conditioning Engineers) standard

62-2001 to ensure adequate ventilation

and safe use.

WARNING SIGNS

Protect your family and guests. Make

sure that all warning signs provided by

the manufacturer, builder, or installer

are displayed according to the manufac-

turer's speciﬁ cations.

Installation

Shock Hazard! Only

qualiﬁ ed, licensed

personnel should install pump and wiring.

A professional

trained and familiar

with pool pump installation must perform

pressure tests.