Burley R6208C Kullanıcı Kılavuzu - Sayfa 15

Mikser Burley R6208C için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Burley R6208C 18 sayfaları. Electric mixer

On / Off switch

Switching on: Press the switch (1)

Continuous running:

Press the locking knob on the switch (1) (2) to lock it in place

Switching off: Press the switch (1) briefly

Speed control: Use the speed control (3) to select the speed.

Switching between 1st - 2nd gear (4)

The switch position enables you to work at high or low speeds. The gear switch position should only be

changed when the unit is stopped, in order to prevent the gearing from being damaged.

Ⅰ 1st gear

Ⅱ 2nd gear

Working With the Paint and Mortar Mixer

The mains plug must be disconnected before the mixing tool is changed.

The unit should be run at low speed before it is immersed in or removed from the mixture. The speed should

only be increased to maximum after it has been fully immersed in the mixture, in order to ensure that motor is

kept as cool as possible. The machine must be moved around inside the mixing vessel during the mixing

process. Continue the mixing process until all of the mixing components have been processed.

Always clean the mixer after you have finished using it.

7. CARE AND MAINTENANCE

Remove the plug from the socket before carrying out any adjustment,

servicing or maintenance.

Your power tool requires no additional lubrication or maintenance. Always store your power tool in a dry

place.

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified

persons in order to avoid a hazard.

If a fault can not be rectified, return the mixer to an authorized dealer for repair.

UŽÍVATEĽSKÝ MANUÁL MIEŠAČOV - MODELY R6208A, R6208B, R6208C

Strana 15 z 17