ChronoRemoteControl SLH Series Programlama Kılavuzu

Uzaktan Kumanda ChronoRemoteControl SLH Series için çevrimiçi göz atın veya pdf Programlama Kılavuzu indirin. ChronoRemoteControl SLH Series 3 sayfaları. Faac remote controls

Sayfayı Yazdır

XT2 868 SLH, XT4 868 SLH and XT2 868 SLH Black

Programming Manual for FAAC remote controls from SLH series.

PRINCIPLE: Each new remote control has its own code and is able to copy the code

of another remote control. Upon the first installation, we register the first remote

control which transmits its code to the radio receiver. Then we register the additional

remotes by copying the code of the 1

Remote control MASTER / SLAVE

In this series of remote controls, there are:

1) MASTER remote controls (LED flashes once and then remains lit steady when

the button is held), which can initialize another remote, and they can be

initialized themselves.

2) SLAVE remote controls (constant light illuminated when the remote control

button is kept pressed) which cannot initialize another remote control.

CAUTION: If you activate more than 32 times the button on the remote, outside the

scope of the receiver, the remote control is no longer recognized by the receiver (due

to the FAAC SLH security rolling code).

To re-synchronize the remote control, press 2 times within five seconds, the button on

the remote control concerned.

Manual

FAAC:

remote control.