Diamond RVE/4C-CM Kullanıcı Kılavuzu - Sayfa 5

Ticari Gıda Ekipmanları Diamond RVE/4C-CM için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Diamond RVE/4C-CM 10 sayfaları. Electric vertical ovens
Ayrıca Diamond RVE/4C-CM için: Kullanıcı Kılavuzu (10 sayfalar)

Sayfayı Yazdır
25
WARNING:
Make sure the installation voltage is the same as the one indicated on the
characteristics plaque placed at the frontal bottom left hand corner of the roaster.
Do not place any object on top of the oven or along its sides that could obstruct the
ventilation grilles.
CHAPTER 3
DESCRIPTION OF THE CONTROLS
The electric rotisseries must be connected to an electrical outlet with their corresponding protective
magnetothermal.
The electric rotisseries are supplied without the connection cable and it must be sized according to the power of
your rotisserie and the current regulations
LIGHTING THE ELEMENTS
Once you have made sure that the mains connection corresponds to what is indicated on the characteristics
plate, merely make a quarter in any direction of the control (Fig. 4) of the element to be used to switch on.
To switch the elements off, make a quarter turn of the control of each element.
Off
Min
Max
Min
ROTATION OF THE SPITS
When you press the switch at the bottom left of your oven, this will light up and the spits will start to turn. Upon
pressing it again, the pilot lamp will go out and the spits will stop turning.