burmeier Solo Kullanım Kılavuzu - Sayfa 5

İç Mekan Mobilyaları burmeier Solo için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. burmeier Solo 12 sayfaları. Overbed table and side table

Sayfayı Yazdır
Instruction Manual for the BURMEIER – Solo / Duo Bed and Side Table
3.2 A
:
SSEMBLY
1. Screw the upright column with
two wing nuts (1) onto the chassis.
The column must be positioned as
seen in the photo – risk of tipping!
2. Place the table top in the desired
position and screw tight using the
wing screw (2).
3. Adjust the height by loosening the
wing screw (3) and then fixing into
position.
4. Castor brake: foot pedal (4)
down.
Duo (optional)
5. Screw the fixed table top to the
chassis using a wing nut (5).
• Ensure that all wing nuts are
tightened properly!
• Maximum central load per table
top: 8 kg
• Perform function test after
installation!
• The table top can be pulled out to a maximum height of 111 cm. If
raised any higher, there is a risk that the retractable tube is pulled out
of the guide tube. There is a risk of tipping the table top
2
5
1
DUO
Positioning the upright stand on
the chassis
3
4
SOLO
Page 5