Burmester B10 Kullanıcı El Kitabı - Sayfa 5

Konuşmacılar Burmester B10 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Burmester B10 8 sayfaları.

OWNER'S MANUAL B10

Binding Posts

We use the same binding posts in our loudspeakers and in our power amplifiers. These

high-grade terminals for speaker cables have proven their sonic excellence and functional

convenience a thousand times over.

We recommend to use pure-copper cable lugs, but you might also use 4 mm banana plugs

for the loudspeaker cable conection.

CAUTION: loudspeaker binding posts may carry dangerous high voltages. Do not let

small children touch them while the speaker is connected to a running power amp.

Speaker Cables

The wiring inside the loudspeakers consists of oxygen-free copper wire with 2,5 mm² cross-

section. We recommend using cables of large cross-section between the loudspeakers and

power amps to ensure optimal control of the speakers by the damping factor of the amplifier.

You will obtain the best result by using original Burmester loudspeaker cables, since they

feature the same electical potential and tonal quality as our loudspeakers and Amplifiers.

Connecting

CAUTION: The power amplifiers have to be switched off while connecting the loudspeakers.

This will avoid shorting out cables that have not yet been completely hooked up. Connect

the speaker cables to the power amplifiers only after ensuring that they are hooked up

correctly to the speakers.

Before turning the amps back on, make sure that all cables have been connected

firmly and correctly with respect to polarity (plus, minus).

After a new hook-up, we recommend increasing the volume slowly until you are sure that

everything is connected correctly.

IMPORTANT: Only connect the speaker cables to the intended binding posts of the

audio amplifier. Never insert the speaker cables into a wall socket/AC mains, since

this will destroy the speakers.

CONNECTING