Burndy Continental Industries ThermOweld CR-4 Talimatlar

Kablolar ve konektörler Burndy Continental Industries ThermOweld CR-4 için çevrimiçi göz atın veya pdf Talimatlar indirin. Burndy Continental Industries ThermOweld CR-4 2 sayfaları. Thermoweld grounding connections - cable to ground rod

Sayfayı Yazdır

thermOweld

INSTRUCTIONS FOR THERMOWELD GROUNDING CONNECTIONS - CABLE TO GROUND ROD

CR-4

Place run cable into mold then butt tap cable ends

agaist run cable. Lock mold closed with frame.

Use locking

pliers or a clamp on the rod below

the mold to prevent it from slipping when the mold

is fired.

CR-11

Place cables into mold then Lock mold closed with

frame. Use locking pliers or a clamp on the rod

below the mold to prevent it from slipping when

the mold is fired.

+1 (918) 627-5210 • 1-800-558-1373 • WWW.THERMOWELD.COM

ELECTRICAL GROUNDING • CATHODIC PROTECTION • ELECTRIC UTILITY • RAIL

The Contractors Choice

Tel. +1.800.558.1373

Tel. +1.918.627.5210

www.thermoweld.com

ECN 2552 REV "F" 03/06/13

34-5381-62