Aquasana EQ-300 Kullanıcı El Kitabı - Sayfa 4

Su Filtrasyon Sistemleri Aquasana EQ-300 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Aquasana EQ-300 16 sayfaları. Whole house water filter
Ayrıca Aquasana EQ-300 için: Kurulum Kılavuzu (5 sayfalar), Kullanıcı El Kitabı (16 sayfalar)

Sayfayı Yazdır

SYSTEM CONFIGURATION

If you have added components to your Rhino

(Installation shown below includes Professional Grade Install Kit)

10" Pre-Filter

(EQ-300 and

EQ-600 only)

20" Pre-Filter

(EQ-1000 and

Pro Kit only)

Salt-Free Water

Conditioner

(Optional)

Before installing

• Lay out system in appropriate configuration. Improper sequence

of equipment will affect performance, and could possibly damage

your system.

• For all installations: Anticipate the need for additional parts and pieces

including but not limited to pex tubing, clamps and mounting screws to

install unit properly (available at a local home improvement stores or

through your plumbing contractor). Due to the varieties of home design,

not all configurations can be addressed in this guide.

• DO NOT install this filter where the line pressure may exceed 100 psi.

The operating pressure range for this filter is between 20psi – 100psi.

• Install on cold water lines only (40° – 90°F).

• Installation of the filtration system must comply with existing state and

local plumbing codes. Aquasana and its manufacturer are not liable for

consequential or incidental damages due to improper installation.

• DO NOT install the unit on its side. It must be installed upright

to maximize contact with media bed.

note the correct sequencing below.

Water Filter System,

10" Post-Filter

(Optional)

Rhino

Water

Filter System

UV Filter

(Optional)