Burndy HYTOOL MD6 Series Güvenlik Çalıştırma ve Bakım Talimatları - Sayfa 4
Kıvrım aleti Burndy HYTOOL MD6 Series için çevrimiçi göz atın veya pdf Güvenlik Çalıştırma ve Bakım Talimatları indirin. Burndy HYTOOL MD6 Series 12 sayfaları.
Sayfayı Yazdır
4
OPERATING SAFETY PRECAUTIONS
This tool is NOT insulated for use on or
near energized conductors. Use of this
tool near energized conductors may lead
to electrical shock, causing severe injury
or death.
Pinch point hazard. Tool jaws operate at
high speed and force and can cause severe
personal injury. Keep all body parts away
from moving parts of the tool, especially
the area of the head and indenters during
operation.
Do NOT over-reach while operating this
tool. Loss of balance can cause serious
personal injury or death. Move closer to
work area and securely support yourself
and your work.
footing and balance.
Projectile hazard. Wear eye protection and
personal protective equipment.
Explosive hazard. Do NOT use tool in an
explosive environment.
ALWAYS keep proper
Use
Tools have been specifically designed for use with
BURNDY
®
products. Use of non-BURNDY
limited to those which conform to BURNDY
specifications applicable to Tools. Use of non-BURNDY
non-conforming products with the tool shall be deemed
misuse or abuse.
TYPE MD6 HYTOOL
Hand-Operated Tool
The MD6 TYPE HYTOOL
tools that use permanent die grooves, and/or insertable
BURNDY
"W" type dies. They install a full range of
®
BURNDY
connectors including service entrance, splices,
®
terminals, stacking lugs, street light, stirrup, and repair
sleeves, etc. Certain versions are available for specific
installation applications. The MD6-8 installs almost all of
the line, pole, and house connections in the BURNDY
Compression Connector Program with only one (1) extra
die set, the W-BG. The tool has two (2) permanent die
grooves, "O" and "D3" for distribution tap connectors.
The "D3" groove also serves as a seat for die inserts to
install additional connectors. The die inserts snap into the
permanent "D3" die holder groove easily with one hand,
and are secured with the spring loaded, positive lock, die
retainer buttons.
All MD6 tools incorporate an over center toggle action
mechanism allowing for easy crimping operations, and
field adjustability.
®
products is
®
technical
TM
series are hand operated
TM
®
,
®