Aquasana High-Flow Pro Series Manuel - Sayfa 7

Su Filtrasyon Sistemleri Aquasana High-Flow Pro Series için çevrimiçi göz atın veya pdf Manuel indirin. Aquasana High-Flow Pro Series 8 sayfaları.

Aquasana High-Flow Pro Series Manuel

Troubleshooting Guide

Symptom
Cause
Flow/Pressure
Too Low
Incoming water valve not completely open
Too Low
Clogged filter cartridge
Too Low
Defective pressure gauge
Leaking
Cartridge
Defective or damaged cartridge O-ring
Manifold
Defective or damaged manifold O-ring
Defective of broken retaining clip (red)
Defective or damaged manifold rotator
Gauge
Gauge not installed properly
Defective or damaged gauge
Taste of water or beverages
Bitter tasting
System not flushed properly
water
Low carbonation
System not installed/plumbed properly
Filter system growing scale
Scale reduction cartridge has reached
capacity
Pure Satisfaction
All Aquasana products offer a 90-day 100% money-back guarantee. (A one-year warranty is
included, which covers defects in materials and workmanship.) If for any reason you are not
satisfied with your purchase, simply call us or the dealer from whom you purchased for a
Return Authorization Code, and a full refund will be promptly issued upon return. Thank you
for choosing Aquasana!
This filter system is designed and tested for use with genuine Aquasana parts including
replacement filters and all hardware. Use of parts from other manufacturers may result in
loss of contaminant reduction performance, system damage or failure. Use of parts from
other manufacturers will also void your warranty. Please visit your distributor or contact us at
aquasana.com or 855.245.1884 for replacement parts.
Action
Open incoming water valve to full open
Replace filter cartridges
Remove and replace pressure gauge
using Teflon
tape
®
Remove and replace cartridge O-rings
or replace filter cartridge
Disassemble manifold and remove and
replace manifold O-rings
Remove and replace clip
Disassemble manifold from bracket and
replace with a new manifold
Remove gauge, apply Teflon
reinstall
Remove and replace pressure gauge
(use Teflon
tape)
®
Flush system utilizing flush drain at exit
port of system manifold
Correct plumbing so that carbonated
beverage center receives
Remove and replace scale reduction
cartridge
tape and
®