Panasonic AG-DVX100B Kurulum - Sayfa 17

Video Kamera Panasonic AG-DVX100B için çevrimiçi göz atın veya pdf Kurulum indirin. Panasonic AG-DVX100B 42 sayfaları. Mini-dv camera-recorder (ntsc)
Ayrıca Panasonic AG-DVX100B için: Teknik Özellikler (12 sayfalar), Teknik Özellikler (12 sayfalar), Kullanıcı Kılavuzu (20 sayfalar)

Sayfayı Yazdır

V Detail Freq

Used in the progressive mode to increase the detail in the vertical portion

of the image. This will slightly improve the sharpness of the image.

video playback, while the thin setting is used for going out to film.

Progressive

This selection allows you to choose between four selections:

OFF: Progressive video recording is turn OFF, you will be using standard interlace

video (60i).

30P: In this selection you will be recording in the Progressive mode at a 30 frame

per second mode. The 30 frames per second video imaged are converted into 60 f

field interlace signals, and the resulting video signals , and the resulting video

signals are output or recorded. In this mode , high-quality still pictures free of

vertical shifting, can be obtained in this mode

24P: In this selection you will be recording in the Progressive mode at a 24 frame

per second mode, or a Cinema look. The 24P frame per second images are

converted into 60 field interlace signals using 3:2 pulldown or conversion system.

The resulting video signals are output or recorded. Cinema-like images can be ob

-tainted in this mode

24P (ADV): In this selection you will be recording in the Advanced Progressive

mode at a 24 frame per second mode. The 24 frames per second video images are

converted into 60 field interlace signal by the advanced 2:3:3:2 pulldown method

and the resulting video signals are output or recorded. Use this setting when the

final product will be transferred to film.

Note: The color bar signal cannot be displayed. The gain cannot be controlled, it is fixed.

The auto focus cannot be utilized. When the progress mode has been selected, the sync

signal may be temporarily disturbed and no video will be output for 3 seconds. A shutter

setting of 1/50 (OFF) or 1/60 is recommended. When using ATW (Auto Tracking White)

function the black balance will not function. Since the video is recorded in 5 frame incre-

ments in 24P and Advanced mode, the timing at which recording starts may be slightly de-

layed.

Name Edit

This selection allows you to change or edit the name of the scene file se-

lected by the scene file dial,

Save / Init

Save, allows you to save changes made in a scene file. Remember to do this

or you will revert back to the old settings when power is turned off or you switch to the VCR

mode. If the initial mode is chosen the scene file settings will return to the factory defaults.

In 24p thick used for