Panasonic AGDVC20P - 3 CCD DV CAMCORDER Kullanım Talimatları Kılavuzu - Sayfa 21
Video Kamera Panasonic AGDVC20P - 3 CCD DV CAMCORDER için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Panasonic AGDVC20P - 3 CCD DV CAMCORDER 40 sayfaları. Agmini-dv camera/recorder
Ayrıca Panasonic AGDVC20P - 3 CCD DV CAMCORDER için: Kullanım Talimatları Kılavuzu (42 sayfalar), Kullanım Talimatları Kılavuzu (42 sayfalar)
Sayfayı Yazdır
DVC20_Eng.book 21 ページ ２００５年１０月３１日 月曜日 午前１０時３６分
Soft skin mode
This allows the skin color to be recorded in a softer tone. This is
more effective if you record the bust image of a person.
≥Set to Tape Recording Mode.
1
Press the [ENTER] button until the icon 1 appears.
2
Press the [4] button to select the soft skin icon [
ª
To cancel the soft skin mode
Select the [
] icon again.
≥If the background or anything else in the scene has colors
similar to the skin color, they will also be smoothed.
≥If the brightness is insufficient, the effect may not be clear.
Tele-macro function
By focusing only on the subject and blurring the background,
the image can be impressive. This camera can focus on the
subject at a distance of approx. 40 cm (16 inches).
≥Set to Tape Recording Mode.
1
Press the [ENTER] button until the icon 1 appears.
2
Press the [3] button to select the tele-macro icon [
≥If the magnification is 10k or less, then it is automatically
set to 10k.
ª
To cancel the tele-macro function
Select the [
] icon again.
≥If a sharper focus cannot be achieved, adjust the focus
manually.
≥In the following cases, the tele-macro function is cancelled.
≥The zoom magnification becomes lower than 10k.
≥The [OFF/ON] switch or the mode switch is operated.
Record mode
Fade in/fade out function
Fade in
The image and audio gradually appear.
Fade out
The image and audio gradually disappear.
≥Set to Tape Recording Mode.
].
1
Press the [ENTER] button until the icon 1 appears.
2
Press the [2] button to select the fade icon [
1
3
Press the recording start/stop button.
Start recording. (fade in)
When you start recording, the image/audio disappeared
completely and the image/audio gradually appears.
Pause recording. (fade out)
].
The image/audio gradually disappears. After the image/audio
completely disappears, recording stops.
1
ª
To cancel fading
Select the [
] icon again.
ª
To select the color for fade in/out
The color which appears in fading pictures can be selected.
1
Set [SETUP] >> [FADE COLOR] >> [WHITE] or [BLACK].
≥While the fade in/fade out function is selected, it takes several
seconds to display the image when you start recording
images. Besides, it also takes several seconds to pause
recording.
Wind noise reduction function
This reduces the wind noise coming into the microphone when
recording.
≥Set to Tape Recording Mode.
1
Set [BASIC] >> [WIND CUT] >> [ON].
ª
To cancel the wind noise reduction function
Set [BASIC] >> [WIND CUT] >> [OFF].
≥Reduces the wind noise depending on the wind strength. (If
this function is activated in strong winds, the stereo effect may
be reduced. When the wind weakens, the stereo effect will be
restored.)
].
1
B
B
21