Panasonic AGHVX200P - MEMORY CARD CAMCORDER Bilgi menüsü - Sayfa 14
Video Kamera Panasonic AGHVX200P - MEMORY CARD CAMCORDER için çevrimiçi göz atın veya pdf Bilgi menüsü indirin. Panasonic AGHVX200P - MEMORY CARD CAMCORDER 25 sayfaları. Panasonic broadcast camcorder mechanical parts list
Ayrıca Panasonic AGHVX200P - MEMORY CARD CAMCORDER için: Parça Listesi (11 sayfalar)
Sayfayı Yazdır
Setup menu list (continued)
RECORDING SETUP screen (continued)
Item
1394 UB REGEN
P2
TAPE
UB MODE
P2
TAPE
UB PRESET
P2
TAPE
1394 IN PRESET
P2
TAPE
108
Display
mode
(MCR/
Selects the user information used when recording the signals from equipment
VCR)
connected to the 1394 terminal.
ON:
Records using the user information of the signal input through the 1394
terminal.
OFF:
Records using the user information set in UB MODE.
• If you select ON here, this has priority over the setting in UB MODE.
• The user information is recorded only when the signal contains the user
information.
• If there is no input to the 1394 terminal, the camera follows the UB MODE
settings.
(Camera)
Set the content for user information.
(MCR/
USER: Records the information of user.
VCR)
TIME: Records the time at recording.
(DUB)
DATE: Records the date at recording.
TCG: Records the values of the time code generator.
FRM. RATE: Records the frame rate information for frame conversion.
a
a:Checking information for user information
b:Frame sequence No.
• 0 to 4 are displayed in the 24P/24P (ADV) mode.
• F is displayed in the 60i/30P mode.
c:Frame rates
• Frame rate (60/30/24)
• I/P ID
• Conversion data
• Frame rate coef cient
d:Recording management data
• Frame update information
• REC START/STOP information
(Camera)
Sets the user information. Select USER in UB MODE.
(MCR/
VCR)
(DUB)
(MCR/
Synchronizes the internal TCG value with the TC of 1394 input when you press
VCR)
the TC SET button.
ON: The synchronization mode is on.
OFF: The synchronization mode is off.
Description of settings
b
c
d
indicates the factory setting.