Panasonic AGHVX200P - MEMORY CARD CAMCORDER Bilgi menüsü - Sayfa 6
Video Kamera Panasonic AGHVX200P - MEMORY CARD CAMCORDER için çevrimiçi göz atın veya pdf Bilgi menüsü indirin. Panasonic AGHVX200P - MEMORY CARD CAMCORDER 25 sayfaları. Panasonic broadcast camcorder mechanical parts list
Ayrıca Panasonic AGHVX200P - MEMORY CARD CAMCORDER için: Parça Listesi (11 sayfalar)
Sayfayı Yazdır
Setup menu list
SCENE FILE screen
Item
OPERATION TYPE
P2
TAPE
FRAME RATE
P2
SYNCRO SCAN
P2
TAPE
DETAIL LEVEL
P2
TAPE
V DETAIL LEVEL
P2
TAPE
DETAIL CORING
P2
TAPE
CHROMA LEVEL
P2
TAPE
CHROMA PHASE
P2
TAPE
COLOR TEMP
P2
TAPE
MASTER PED
P2
TAPE
A. IRIS LEVEL
P2
TAPE
NEWS GAMMA
P2
TAPE
100
Display
mode
(Camera) Switches the shutter and frame rate operation to the video type or lm type.
VIDEO CAM: SYNCRO SCAN is displayed using 1/n units.
The frame digits of the time code are displayed for 30 frames.
• These digits are displayed for 24 frames when 720P/24PN is selected for the
REC FORMAT (P2) option (page 106) on the RECORDING SETUP screen.
FILM CAM: SYNCRO SCAN is displayed as an angle.
The frame digits of the time code are displayed for 24 frames.
(Camera) Selects the shooting interval and exposure time when 720P and FILM CAM is
selected. The DEFAULT value is dependent on the frame rate of the recording
format.
DEFAULT, 12, 18, 20, 22, 24, 26, 30, 32, 36, 48, 60 FRAME:
(Camera) Adjusts the synchro scan shutter speed used for shooting images on a TV
screen, etc.
Press and hold the operation button to
When VIDEO CAM is selected as the OPERATION TYPE option setting:
• 60P/60i:
1/60.0
...1/249.8
• 30P/30PN:
1/30.0
...1/48.0
...1/249.8
• 24P/24PA/24PN:
1/24.0
...1/48.0
...1/249.8
When FILM CAM is selected as the OPERATION TYPE option setting:
The shutter speed is displayed as an angle such as "180.0d."
10.0 deg ... 180.0 deg ... 350.0 deg (the angle can be changed in increments
of 0.5 degrees)
(Camera) Adjusts the level of the image outline correction (in the horizontal and vertical
directions).
-7...0...+7
(Camera) Adjusts the level of outline correction in the vertical direction.
-7...0...+7
(Camera) Adjusts the level of noise reduction of the detail signal.
-2...0...+7
Set to – for a clearer image. Noise increases slightly.
Set to + to reduce noise.
(Camera) Adjusts the chroma level.
-7...0...+7
(Camera) Makes ne adjustments to the chroma phase.
-7...0...+7
(Camera) Makes ne adjustments to the color temperature (after white balance
adjustment).
-7...0...+7
(Camera) Adjusts the master pedestal (black level of the image) as the basis for images.
-15...0...+15
(Camera) Sets the desired AUTO IRIS level.
-4...0...+4
(Camera) Selects the news gamma curve.
ON OFF
Description of settings
or
to speed up the value changing.
indicates the factory setting.