AquaScape 40040 Manuel - Sayfa 5

Su Pompası AquaScape 40040 için çevrimiçi göz atın veya pdf Manuel indirin. AquaScape 40040 16 sayfaları. Smart pond dosing system

Sayfayı Yazdır

• The Controller Add-on Kit includes the control panel,

intake assembly, and tubing. Simply slide the second

control panel into the lid (Ex. 12), remove the rubber elbow

attached to the secondary power cable

(Ex. 13) and repeat the steps from above to complete

installation.

Ex. 12

SETTINGS

NOTE: If using the Smart Control App, skip down to the

next section (APP PAIRING).

• The control panel will default

to setting 1. To determine

the setting for your water

feature without using the

Smart Control App, use the

QR code (Ex. 14) or locate

the QR code on your water

treatment to access the XT

setting selector.

• Once setting is determined

use the + and - buttons on

the control panel to set to recommended setting.

APP PAIRING

• Make controlling and monitoring the XT system easy by

connecting the control panel to the Aquascape Smart

Control App.

NOTE: Adequate Wi-Fi Coverage is required (2.4 GHz

networks supported). A strong stable network will

prevent connection issues. For additional information visit

aquascapeinc.com/smart-control-app.

NOTE: The blinking blue light indicates the unit is in pairing

mode and ready to be connected.

• Download the Aquascape Smart

Control App (available on iOS or

Android App Store).

• Open the app and click 'Create New

Account' (Ex. 15).

NOTE: If you already have an account,

password.

aquascapeinc.com |

CAN (866) 766-3426 |

☎

• Once logged in, click the three dashes in the upper, right-

hand corner of the home screen (Ex. 16).

• Click 'Add New Device' (Ex. 17).

• Continue to follow on-screen instructions to complete the

pairing process.

NOTE: To reset the device to factory defaults, press and

hold the + and - button for 5 seconds within 1 minute of

connecting the controller to power then release when the

Ex. 13

LCD screen shows 88.

PRIMING PROCEDURE

• When first setting up the system or when adding a new

water treatment bottle, the system should be primed to

push the treatment through the output tubing.

• The priming process can be completed in the Smart

Control App or manually. To manually enter the priming

mode, hold the x2 button for 3 seconds until blue light

above the x2 button begins to flash. The priming mode will

automatically turn off after approximately three minutes,

returning to normal operation. The priming mode can be

exited at any time by pressing the x2 button when the

treatment begins to discharge at the end of the tubing.

LOW-TREATMENT ALERT

Ex. 14

• The system is equipped with a convenient low-treatment

alert which uses an electromagnetic switch on the intake

assembly to notify you when a treatment bottle is 90%

empty, ensuring you can replace the treatment before it

runs out.

• When 90% empty, the Low-Treatment Alert LED on the

control panel will illuminate (Ex. 18).

• Pair the control panel to the Aquascape Smart Control

App to receive low-treatment alerts on your smartphone or

tablet (Ex. 19).

Ex. 15

☎

US (866) 877-6637

Ex. 16

Ex. 18

Ex. 17

Ex. 19