AquaScape AquaBasin Kurulum ve Bakım Talimatları - Sayfa 2

Su Pompası AquaScape AquaBasin için çevrimiçi göz atın veya pdf Kurulum ve Bakım Talimatları indirin. AquaScape AquaBasin 3 sayfaları. Ultrapump kit

Sayfayı Yazdır

AquaBasin

System

Installation & Maintenance Instructions

Instructions

1) Set the AquaBasin

™

in the desired location and

trace out the area that will be dug out. (Fig. 1)

2) Using the marked out area as your guide, dig your

hole for the AquaBasin

15" deep. Make sure that

™

you tamp the hole in order to prevent any unneces-

sary settling. (Fig. 2 & 3)

3) Place the AquaBasin

in the hole and using a

™

level, make sure it is level side-to-side, and front-

to-back. (Fig. 4)

4) Once the AquaBasin

is level, start to backfill

™

with dirt. (Fig. 5)

Fig. 3

™

Fig. 1

Fig. 2

Fig. 4

Fig. 5

How to Assemble the AquaBasin™ UltraPump Kit

Ball Valve

• Assemble the pump as show in photo above.

• Attach the vinyl tubing to the fittings with the

supplied hose clamps. Use a pair of pliers to

tighten the hose clamps.

How to Hook Up a Stone Fountain

1) Feed the vinyl tubing through the hole

in the center of the AquaBasin

. Place

™

several 3"-4" stones around the hole and

vinyl tubing. This will prevent smaller

gravel from falling in.

2) Next, carefully place the stone fountain

in the center of the AquaBasin

™

and

feed the tubing through the hole in the

fountain. The AquaBasin

™

is designed

with an 18" wide recessed area in the middle. Depending on the decorative piece being

used, this recessed area will allow you to backfill with gravel around the decorative piece

giving it a more stable platform to sit on. It is recommended that tall or oddly shaped

pieces be set in the middle and backfilled with gravel to prevent the piece from falling

over. (Fig. 6)

3) If you do not have to backfill around the decorative piece simply fill the recessed area

in with gravel in order to make the fountain level with the top of the basin. (Fig. 7)

4) The AquaBasin

is designed with two removable grates for easy pump access. Place the

™

pump inside the AquaBasin

and connect the tubing to the Ultra pump and ball valve

™

using the clamps supplied from the Ultra Pump AquaBasin

or #98138 sold separately). The cord from the pump can be run out the notch in the side

of the AquaBasin

. (Fig. 8 & 9)

™

Fig. 6

Ultra Pump

Threaded

Adapter

FPT x Barb

Fitting

Kit (items #98136, #98137,

™

Fig. 7

Fig. 8