Chrysler TOWN & COUNTRY 2016 Kullanıcı Kılavuzu - Sayfa 15

Otomobil Chrysler TOWN & COUNTRY 2016 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Chrysler TOWN & COUNTRY 2016 20 sayfaları.

NOTE:

If the transmission is not in PARK and the vehicle is in motion, the ENGINE START/STOP

button must be held for two seconds with the vehicle speed above 5 mph (8 km/h) before the

engine will shut off.

Installing And Removing The ENGINE START/STOP Button

Installing The Button

1. Remove the Key Fob from the ignition switch.

2. Insert the ENGINE START/STOP button into the ignition switch with the lettering facing up

and readable.

3. Push firmly on the center of the button to secure it into position.

Removing The Button

The ENGINE START/STOP button can be

removed from the ignition switch for Key Fob

use.

• Insert the metal part of the emergency key

under the chrome bezel at the 6 o'clock

position and gently pry the button loose.

NOTE:

The ENGINE START/STOP button should

only be removed or inserted with the ignition in

the LOCK position (OFF position for Keyless

Enter-N-Go).

Accessory Positions With Engine Off

NOTE:

The following functions are with the driver's foot off of the Brake Pedal (transmission in PARK).

Beginning With The Ignition Switch In The OFF Position:

1. Push the ENGINE START/STOP button once to cycle the ignition to the ACC position.

2. Push the ENGINE START/STOP button a second time to cycle the ignition to the ON/RUN

position.

3. Push the ENGINE START/STOP button a third time to return the ignition to the OFF

position.

NOTE:

If the ignition is left in the ACC or ON/RUN

(engine not running) position and the transmis-

sion is in PARK, the system will automatically

time out after 30 minutes of inactivity, and the

ignition is returned to the OFF position.

G E T T I N G S T A R T E D

ENGINE START/STOP Button Removal

Ignition Positions