AquaScape 91019 Manuel - Sayfa 7
Havuz Pompaları AquaScape 91019 için çevrimiçi göz atın veya pdf Manuel indirin. AquaScape 91019 16 sayfaları. Skimmer and pondless waterfall vault pump
Ayrıca AquaScape 91019 için: Talimatlar ve Bakım (16 sayfalar)
Sayfayı Yazdır
Winter Application
• If concerned about possible freeze damage, disconnect the threaded collar on the fitting and remove the pump from the
filter (be careful not to lose the flat rubber washer). Clean the pump and inlet screens with fresh water and store the pump
in a frost-free location. The pump can be run during freezing weather, if desired, but the pump should be removed in the
event of a power failure to prevent any freeze damage to either the pump or the piping.
Troubleshooting
• Reduced water flow
– Pump or plumbing may be clogged. It may be necessary to clean the filter screens and impeller.
• Pump hums but doesn't push water
– The pump or plumbing may be clogged.
It may be necessary to clean the filter screens and impeller.
Remove the water chamber cover and inspect and clean the impeller rotor assembly and internal pump body.
Make sure nothing is blocking or wrapped around the impeller.
– Make sure the pump is receiving the correct voltage.
– Make sure the impeller blades are not worn or damaged.
• Pump not working
– The ground-fault circuit interrupter (GFCI) may have tripped.
– The pump is not receiving the correct voltage.
Replacement Parts
AquaSurge
Pond Pump Replacement Parts
®
No. Item number/description
1.
91063 – AquaSurge 2000/3000 (G2) Intake Screen Kit
1.
91064 – AquaSurge 2000/3000 (G2) Intake Screen Kit
2.
91065 – AquaSurge (G2) Discharge Fitting Kit
3.
91066 – AquaSurge 2000/3000 (G2) Water Chamber Cover and O-Ring Kit
3.
91067 – AquaSurge 4000/5000 (G2) Water Chamber Cover and O-Ring Kit
4.
91068 – AquaSurge 2000/3000 (G2) Pump Handle and Feet Kit
4.
91069 – AquaSurge 4000/5000 (G2) Pump Handle and Feet Kit
5.
91070 – AquaSurge 2000 (G2) Replacement Impeller Kit
5.
91071 – AquaSurge 3000 (G2) Replacement Impeller Kit
5.
91072 – AquaSurge 4000 (G2) Replacement Impeller Kit
5.
91073 – AquaSurge 5000 (G2) Replacement Impeller Kit
91155 – Pump/Filter Union Gasket Kit
☎
aquascapeinc.com |
CAN (866) 766-3426 |
1
☎
US (866) 877-6637
2
5
3
4
7