Diamond UF200 Kullanıcı Kılavuzu - Sayfa 3

Dondurucu Diamond UF200 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Diamond UF200 7 sayfaları.
Ayrıca Diamond UF200 için: Kullanıcı Kılavuzu (7 sayfalar)

Sayfayı Yazdır

Important safety instructions

1. To obtain full use of the cabinet, we recommend reading this instruction manual.

2. It is the user's responsibility to operate the appliance in accordance with the instructions

given.

3. Contact your dealer immediately in case of any malfunctions.

4. Place the cabinet in a dry and ventilated place.

5. Keep the cabinet away from strongly heat-emitting sources and do not expose it to direct

sunlight.

6. Always keep in mind that all electrical devices are sources of potential danger.

7. Do not store inflammable material such as thinner, gasoline etc. in the cabinet.

8. We declare that no asbestos nor any CFC are used in the construction.

9. The oil in the compressor does not contain PCB.

Unpacking and installation

Remove the wooden pallet and the packing. External surfaces are supplied with a protection foil,

which must be removed before installation

To ensure correct function it is important that the cabinet is level. The cabinet is supplied with legs,

these can be adjusted. See fig. 1.1.

If you want to build in your cabinet please note the following:

3. There must be at least 15 cm free space above the cabinet in order for the cooling system to

work satisfactorily.

4. There must be sufficient space at the hinge side to clean and replace the shelves and clean

around the hinge.

Fig. 1.1