Panasonic WV-NF284 - i-Pro Network Camera Kurulum Kılavuzu - Sayfa 23

Video Kamera Panasonic WV-NF284 - i-Pro Network Camera için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Panasonic WV-NF284 - i-Pro Network Camera 36 sayfaları. Ip video cameras
Ayrıca Panasonic WV-NF284 - i-Pro Network Camera için: Teknik Özellikler (2 sayfalar), Broşür (2 sayfalar), Referans (2 sayfalar), Referans (2 sayfalar), Karşılaştırma Tablosu (6 sayfalar), Teknik Özellikler (2 sayfalar), Teknik Özellikler (2 sayfalar), Entegrasyon Notu (8 sayfalar)

Sayfayı Yazdır
Panasonic WV-NF284 - i-Pro Network Camera Kurulum Kılavuzu
Important:
• Do not connect 2 wires or more directly
to a terminal. When it is necessary to
connect 2 wires or more, use a splitter.
• Connect an external device with verifying
that the ratings are within the specifica-
tions below.
r Insert the external I/O terminals plug to
the external I/O terminals on the mount-
ing side of the camera firmly.
* Make sure that the external I/O terminals
plug is inserted to the external I/O termi-
nals firmly.
External I/O terminals
<Ratings>
r GND
e AUX output
q Alarm input
w Alarm output
(ALARM OUT)
q ALARM IN
No-voltage make contact input (4-5 V DC
pulled up)
OFF: Open or 4-5 V DC
ON: Make contact with GND (required
drive current: 1 mA or more)
(AUX OUT)
(ALARM IN)
w ALARM OUT, e AUX OUT
Open collector output (external max.
applied voltage: 20 V DC)
OPEN: 4-5 V DC, internally pulled up
CLOSE: Output voltage of 1 V DC or less
(100 mA or less)
23