Panasonic WV-SP509 Kurulum Kılavuzu - Sayfa 28
Video Kamera Panasonic WV-SP509 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Panasonic WV-SP509 40 sayfaları. Ip video cameras
Ayrıca Panasonic WV-SP509 için: Şartname (2 sayfalar), Kurulum Kılavuzu (36 sayfalar), Entegrasyon Notu (8 sayfalar)
Sayfayı Yazdır
When using PoE (IEEE802.3af compliant)
Connect a LAN cable (category 5 or better, straight, STP*) between a PoE device (such as a hub)
and the network connector of the camera.
* E models only.
IMPORTANT:
• Use all 4 pairs (8 pins) of the LAN cable.
• The maximum cable length is 100 m {328 feet}.
• Make sure that the PoE device in use is compliant with IEEE802.3af standard.
• When connecting both the 12 V DC power supply and the PoE device for power supply, 12 V
DC will be used for power supply. Depending on the PoE device used, the power supply lamp
may not light and the network connections may not be possible. In this case, disable the PoE
device setting, and refer to the operating instructions of the PoE device in use.
• When disconnecting the LAN cable once, reconnect the cable after around 2 seconds. When
the cable is quickly connected, the power may not be supplied from the PoE device.
Connection example when connecting to a network using a
PoE hub
Speaker with ampli er (option)
SP509
Microphone (option)
Speaker with ampli er (option)
SP509
Microphone (option)
<Required cable>
LAN cable (category 5 or better, straight, STP*)
* E models only
IMPORTANT:
• The video monitor is used for checking the adjustment of the angular field of view when install-
ing the camera or when servicing. It is not provided for recording/ monitoring use.
• Use a switching hub or a router which is compliant with 10BASE-T/100BASE-TX.
• Power supply is required for each network camera. When using a PoE device (hub), 12 V DC
power supply is unnecessary.
28
Video monitor (for
adjustment use only)
SP509
SP509
PoE device (hub)
LAN cable (category 5
or better, straight, STP*)
LAN cable (category 5 or
better, straight, STP*)
Video monitor (for
adjustment use only)
LAN cable
(category 5 or better, straight, STP*)
PC