3B SCIENTIFIC PHYSICS U8475400 Talimat Sayfası - Sayfa 4

Dış Mekan Işığı 3B SCIENTIFIC PHYSICS U8475400 için çevrimiçi göz atın veya pdf Talimat Sayfası indirin. 3B SCIENTIFIC PHYSICS U8475400 12 sayfaları. Optical lamp k

4. Operation
Recommended additional equipment:
For supplying the voltage for the halogen lamp:
Transformer 12 V, 25 VA (230 V, 50/60 Hz)
or
Transformer 12 V, 25 VA (115 V, 50/60 Hz)
For mounting the halogen light source:
Optical rider K
For carrying out the experiments:
Optical bench K, 450 mm
or
Optical bench K, 1000 mm
Optical components from the Kröncke optical system
Set up the experiment.
Mount the halogen light source on the optical
rider K in the vertical or horizontal position ac-
cording to preference, and connect it to the
transformer.
Carry out the experiment.
5. Changing the bulb
Disconnect the voltage supply from the halogen
light source.
If necessary, allow the halogen light source to
cool.
Loosen the knurled securing screws and remove
the protective cap.
Using a cloth or similar material, take out the
halogen bulb replace it with the new one.
Refit the protective cap and tighten the screws.
When disposing of a used halogen lamp, comply
with local regulations.
Elwe Didactic GmbH • Steinfelsstr. 6 • 08248 Klingenthal • Germany •
3B Scientific GmbH • Rudorffweg 8 • 21031 Hamburg • Germany •
U8475430-230
U8475430-115
U8475350
U8475336
U8475337
Subject to technical amendments
© Copyright 2007 3B Scientific GmbH
www.elwedidactic.com
www.3bscientific.com