Panasonic CT-20L8 Manuel - Sayfa 7
TV Panasonic CT-20L8 için çevrimiçi göz atın veya pdf Manuel indirin. Panasonic CT-20L8 22 sayfaları.
Sayfayı Yazdır
Optional Equipment
Connections
Note:
The remote control must be programmed
with supplied
codes to operate the optional equipment.
VCR Connection
VCRs,
video
disc
players,
video
game
equipment,
and
DSS equipment
can also be connected
to the video
inputs.
See the optional
equipment
manual
for more information.
Note for models with Component
video input:
VIDEO
1 input is a dual-purpose
input.
It is
primadly intended for connection with 480i devices
such
as a
DVD player
using
the
Y PB PR
component
video jacks and Audio L & R jacks.
However, it can also be connected to conventional
composite
video sources such as a VCR, using
only the Y/Video jack and Audio L & R jacks. The
on-screen
label will display Component or Video 1
depending on which source is connected.
_N_ONS
ON BACK_
_E _V
INPUTI
R
^LSDIO •
........ ©
©
L_pI_
pl_
YNID_O
.
©
©
©
INPUT 2
......
©
©
©
_
Augo
•
VlDO
_
Nm_JPtqJED
_
i
IJ
Note:
Rear A/V jacks diagram may vary, depending on model
Please refer to the FEATURE CHART on page 2 for your
model capabilities.
Procedure
Connect equipment as shown to rear Audio/Video
input
jacks.
Note:
Use either the S-Video or Video Connection for
models with S-Video connection.
Select the Video mode by pressing TVNIDEO
button.
Operate optional equipment as instructed in equipment
manual.
Front Control
Panel
The front control
panel can be used to access
menus
and
switch
video
mode
when
the
remote
control
is not
available.
Note:
Front A/V jacks diagram may varyl, depending on model
Please refer to the FEATURE CHART on page 2 for your
model capabilities.
A second
VCR,
Camcorder,
a video
disc
player,
video
game equipment
or DSS equipment
can also be connected
to the vidoeo
inputs.
See the optional
equipment
manual.
Procedure
Connect equipment to front Audio/Video input jacks.
Select the Video mode by pressing TVNIDEO
button.
Operate optional equipment as instructed in equipment
manual
OP_ONAL
EQUIPMENT
OONNEC_ONS
Cable Box Connection
Follow this diagram when connecting your television to a
Cable Box.
r
_i_
I
CONNECTIONS
ON BACK
OF THE TV
INPUT I
R--AUDIO
--L
COMPONENT
O
O
VIDEO
INPUTS
L--
p_ --
p
--
y/V_DEC
©
© ©
INPUT 2
©
© ©
R_AUDIO
--L
VIDEO
•
J
CABLES
NOT SUPPLIED
Note:
Rear A/V jacks
diagram may vary, depending
on
model. Please refer to the FEATURE CHART on page
2 for your model capabilities.
Procedure
Tune the television to channel 3 or 4 depending on the
RF out setting of the cable box.
Using the cable box, tune to the premium cable channel
you want to view.
Digital TV - Set-Top
Box (DTV-STB)
or DVD
Player Connection
(some models)
Use
this
diagram
to
connect
the
Panasonic
DTV-STB
(Digital
TV-Set-Top
Box) to the back of your TV.
Note:
Rear A/V jacks
diagram may va_
depending
on
model. Please refer to the FEATURE CHART on page
2 for your model capabilities.
TErMiNALS OR B_CK O_ _W STBOR _W _Y_
/ I_FUT
MENT I,_P_JTT_Rat NALS Of_ BA
OFTHE_
Notes:
There
are
three
video
jacks,
Y, PB, and
PR-
Separate
component
color
inputs
provide
luminance and color separation.
Use the L (left)
and R (right) audio inputs.
Select DTV-STB to 480i output mode. TV set can
receive 480i signal only.
50