Diamond Audio MOTORSPORT MP525 Kullanıcı El Kitabı - Sayfa 8
Konuşmacılar Diamond Audio MOTORSPORT MP525 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Diamond Audio MOTORSPORT MP525 12 sayfaları. Pro audio horn coax drivers
Sayfayı Yazdır
TWEETER DIAPHRAGM REPLACEMENT - DISASSEMBLY
Allen Wrench
Once the Back cover is unscrewed.
Un-Solder the tweeter wires. It is
best that you shoot a photo to make
sure you wire it back correctly.
Make a note about which wire is
positive (+) and which wire is negative (-)
Tweeter Diaphragm
Assembly
8
THIS IS JUST IN CASE YOU BLOW YOUR TWEETER UP!
FIRST THINGS FIRST:
The Back cover needs to be removed. These sre 5 mm HEX
machine screws. Remove them and put them in a ZipLock bag
so you dont loose them. BE CAREFUL as there are small gauge
tweeter wires connected to the Diaphragm assembly (as shown)
Soldering
Iron
Put the Back cover with tweeter wires in a safe place.
Now remove the Philip Head screws holdng the Tweeter
Diaphragm assembly
Gently lift the Tweeter Diaphragm Assembly
off the NEO magent structure. Remove
the Phase plug.
Tweeter Diaphragm
Assembly
60/40 Solder
Phase Plug