AquaStar 2700 ES Kurulum Talimatları Kılavuzu - Sayfa 4
Su Isıtıcı AquaStar 2700 ES için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. AquaStar 2700 ES 12 sayfaları. Tankless water heater
Ayrıca AquaStar 2700 ES için: Kurulum Talimatları Kılavuzu (8 sayfalar)
Sayfayı YazdırInstalling outdoor kit
3
Installing outdoor kit
Replace the control panel shield
B Loosen the two Philips head screws located on
bottom rear of cover (see Fig. 2).
Fig. 2
Loosen the two screws
B Remove the front cover panel and replace the
original control panel shield with shield provided in
the kit, see Fig. 3.
1.
2.
3.
Fig. 3
Replace the control panel shield
Warning: The control panel shield
must always remain closed, except
when making adjustments, to prevent
damage to heater from weather.
B After replacing the control panel re-position the front
cover.
4
6720608547-14.1AL
1.
B 1. Remove the cover plate (A) installed on the top of
the appliance, as shown in Fig. 4.
B 2. Attach the supports (B) to the appliance by
fastening with the four provided screws, as shown in
Fig. 4.
Fig. 4
Before mounting the outdoor kit in the appliance:
B 3. Attach the gasket provided with the kit as shown
in Fig. 5.
Fig. 5
B Position the outdoor vent cap on the top of the
appliance, as shown in Fig. 6.
6 720 608 835