aquata Dry Diving Suit Kullanıcı Kılavuzu - Sayfa 10

Dalış Aleti aquata Dry Diving Suit için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. aquata Dry Diving Suit 20 sayfaları.

1. General Use of Drysuits

This brochure is not a manual for the use of Dry Diving Suit. It gives assistance with use

and maintenance, how they result from daily operational sequence. Learning the use of

dry diving must take place under expert guidance. In addition you turn best to your spe-

cialist dealer or diving club. We advise against urgently to go yourself with the acquired

suit immediately into the water. Use the expert guidance by a diving in teacher. And apply

for the relevant courses. Only then you have the guarantee for the fact that you can also

really master unexpected problems. This applies in particular to the up ad down going , as

well as the use of a Jackets. Avoid under all circumstances (even if it hurts now) a diving

course, if you at course - and the other equipment is not 100% is perfect.

You information mediated here are only a general recommendation:

Attach the air hose at the medium pressure exit of the first stage. The connection is a

UNF 3/8 " thread, which fits into the normal low pressure exit. The opposite side of the

hose can be either a normal Inflator coupling, or however a special connection, as it is at

our "Sitech„ valve. If an experienced diver wants to extend the connection, this happens

on own risk. You should inflate the suit up somewhat more than normally thereby puts it

straight and you are be able to control it better. Pay attention to carry always sufficient

large fins.

Normally you need for a neoprene suit approx. 1 kg lead per mm. Count with a dry suit

the double weight, i.e. 12-15 kg. With Trilaminat suits only about half. In the case of

correct counterbalancing the diver should sink after discharging air from the suit slowly

downward. If the drift speed is too high, lead must be reduced. Consider also that the

maximum lead quantity is as indicated above necessary only if you need firm conditions

on the soil.

Start their diving exercises with the suit in flat water. Try to get experienced divers for

your first dive trip. But better enter a dry diving course. Stop the diving immediately if

your equipment is not perfect. Pay attention to perfect buoyancy. Theoretical knowledge

of the dry diving is indispensable before the beginning of diving.

1.1 Preparation and handling

1. Please examine the comple-

teness of the supply:

a. suit

b. intake valve

c. exhaust valve

d. inflatorhose

e. zipper wax

f. carry bag (not all models)

0 1 | EN

Fill only the

channel with

silicone

ca. half filled with silicone

Inner ring cut

off for apeks

valves