3Built RES126VX Hızlı Başlangıç Kılavuzu - Sayfa 7
Otomobil Aksesuarları 3Built RES126VX için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. 3Built RES126VX 9 sayfaları. Remote engine shut-off
Ayrıca 3Built RES126VX için: Kurulum Talimatları (5 sayfalar), Kurulum Talimatları (3 sayfalar)
Sayfayı Yazdır
PROGRAMMING TRANSMITTER TO RECEIVER
All programming must happen within 10 seconds of powering the receiver.
1) Disconnect power to the Receiver.
2) Have the new Transmitter (with battery) ready. Test by pushing a button and the red
LED should turn on.
3) Apply power to the Receiver and continue to the next step within 10 seconds.
4) Push the bottom button on the transmitter for 2 seconds and release.
5) The receiver will emit a continuous beep.
6) Press and release the LOCK button.
7) The receiver will beep once.
8) Press and release the UNLOCK button.
9) The receiver will beep twice.
10) Disconnect power to the Receiver for a few seconds.
11) Connect power to the Receiver and test THE Transmitter by pushing the Lock and then
the Unlock buttons.
©2020 3Built LLC
LONG RANGE TRANSMITTER
Page 7 of 9
10/5/2020