Diamond Guitar Pedals Memory Lane 2 Kullanıcı Kılavuzu - Sayfa 6

Müzik Pedalı Diamond Guitar Pedals Memory Lane 2 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Diamond Guitar Pedals Memory Lane 2 8 sayfaları. Analog delay with tap tempo and dual independent delay times

Sayfayı Yazdır

Switches

ON/OFF

This switches the pedal between bypass and in-circuit operation, with the LED just above the switch

lighting red or green to indicate that the audio path through the delay is on, while an unlit LED indicates

the delay is bypassed. When in-circuit, the color of the LED also indicates which delay is active. A red

LED indicates that DLY1 is active, a green LED indicates that DLY2 is active.

DLY1/DLY2

This switch allows the user to toggle between two completely independent delay time settings. When the

pedal is on, pressing this switch will toggle the ON/OFF LED between red and green:

• DLY1 (red LED): Delay time is set using DELAY knob or expression pedal).

• DLY2 (green LED):Delay time is set by tapping the TAP/MOD switch (see below).

TAP/MOD

For DLY1, this footswitch turns on or off the modulation. A green LED above this switch indicates that

modulation is off, a red LED indicates that modulation is on. Note: if the master mod depth control is

switched off, toggling the mod footswitch will have no effect on sound and the LED will remain green.

For DLY2 this footswitch sets delay time, with every 2nd tap on the switch setting a new tempo. This is a

bit different than most digital delays, where each tap measures the time from the last tap. On the Memory

Lane 2, every tempo tap should be done in two's – the first tap begins a new measure of tempo, the

second completes the measure and sets the new tempo. The tempo only changes when the 2nd tap is

complete. If time between the 1st and 2nd taps exceeds the maximum delay time, the Memory Lane 2

simply defaults to maximum delay time.

Dotted 8th Note Feature (DLY2 only)

When the Memory Lane 2 is set to DLY2 and is in dotted 8th mode (switch in up position), tapping

quarter notes at the desired tempo will result in echoes which will sound in dotted 8th note rhythm. Note

that it is not possible to set the tempo in normal mode and then switch to dotted 8th and have the pedal

'switch' to the new delay time- you have to re-enter the tempo after switching to dotted 8th mode. Please

note that due to the available delay time, dotted 8th note rhythms will be in time for tempos of 110BPM or

greater only.

Slap Mode Feature (DLY1 only)

Engaging the slap mode switch overrides the LEVEL knob setting for DLY1 effectively setting the

Feedback to minimum. This results in a single repeat for DLY1 while the repeats from DLY2 continue to

be determined by the LEVEL knob setting. This allows for a great 'slapback' setting on DLY1 and a more

ambient, spacious setting on DLY2.

Memory Lane 2 user manual v1.00