Panasonic AG-HPX250EJ Elektriksel Ayarlama - Sayfa 2
Dijital Kamera Panasonic AG-HPX250EJ için çevrimiçi göz atın veya pdf Elektriksel Ayarlama indirin. Panasonic AG-HPX250EJ 20 sayfaları. Memory card camera recorder
Ayrıca Panasonic AG-HPX250EJ için: Kullanım Kılavuzu (36 sayfalar)
![Panasonic AG-HPX250EJ Elektriksel Ayarlama](/uploads/products/server2/3807764/3807764.jpg)
1. Preparation of adjustment
When an electrical adjustment is executed, the PC EVR software is used.
1-1. PC EVR software
1-1-1. Required tools and equipment for PC EVR software
When the PC EVR software is used, the following tools are required.
NAME
PC EVR
software
USB Driver for AG-HPX250/260 EVR Adjustment
USBC cable A type ↔ mini B
Personal Computer
*OS: WINDOWS XP SP2 / SP3
1-1-2. Installation method of USB driver
This USB driver is only for Windows XP.
1. Download the file "USB Driver for AG-HPX250/260 EVR Adjustment (VSI5386A)" from Global Service WEB
Site and extract it.
2. This camera recorder is set to COM mode.
< Setting method of COM mode >
2-1. Turn the power on and confirm that the camera recorder is set to CAMERA mode.
2-2. The COM mode is set by hold down the "PLAY (Tilt the operation lever in the ▲ direction)" button,
"EXIT" button and "RESET" button at the same time for three seconds or more. (The character of "COM"
blinks to the LCD screen when the COM mode is set.).
NOTE: To cancel the COM mode, execute the operation of the same button as the setting. (Com mode cannot be
cancelled if the power has been switched off and back on again.).
3. Connect the USB cable between USB connector and PC.
Part Number
VVS0095
VSI5386A
---
---
USB cable
A type
Pcs.
1
Download from the Global Service WEB site.
1
Download from the Global Service WEB site.
1
1
*NOTE:
USB connector
Mini-B
ELE-1
Remark