Panasonic AG-HPX250EN Elektriksel Ayarlama - Sayfa 5
Dijital Kamera Panasonic AG-HPX250EN için çevrimiçi göz atın veya pdf Elektriksel Ayarlama indirin. Panasonic AG-HPX250EN 20 sayfaları.
Ayrıca Panasonic AG-HPX250EN için: Kullanım Talimatları Kılavuzu (36 sayfalar)
Sayfayı Yazdır
1-1-3. Setup for PC EVR Software
1. Copy all files of the PC EVR software (VVS0095) to the PC.
2. Supply power to the Camera-Recorder and turn power ON.
3. Start up the PC EVR software by double-clicking "HPX250.exe".
4. The Selection screen will appear. Select the model name.
5. Select the "CAM(C)" and click "OK" button. The following screen will appear and when communication
between the PC and the Camera-Recorder has been succeeded, blue is displayed to the status lamp.
STATUS LAMP
6. The communication status between the PC and the camera recorder can be confirmed with the status lamp as
following color.
Not Connected
:
Connected
:
Reading
:
Writing
:
NOTE: When the "OK" button is clicked on the Selection screen, "Detection of not initialized P.C.Board" might
be executed in this EVR software. Please refer to the item "7-3. Setup of PC EVR software" (SECTION
1).
black
blue
green
red
ELE-4