Panasonic AK-HPR1000G Kullanım Talimatları Kılavuzu - Sayfa 6
Dijital Kamera Panasonic AK-HPR1000G için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Panasonic AK-HPR1000G 44 sayfaları. 8k multi purpose camera
Sayfayı Yazdır
Installation Instructions
Before installing
Before installing
Drop prevention measure
Take the drop prevention measure by attaching the drop prevention wire to the mounting screw hole.
Mounting the camera to the pan/tilt head
Prepare a commercially available drop prevention wire when mounting this unit to the pan/tilt head.
Mounting the camera to anything other than the pan/tilt head
Prepare the drop prevention wire and camera mounting fixture when attaching to anything other than the
pan/tilt head.
1 Drop prevention wire (optional): 2
Always use the drop prevention wire.
A drop prevention wire is available as an optional accessory. Use with as small slack as allowed by the
installation location or the installation method.
Secure wire diameter of 2 mm (3/32 inches) or more, length of 300 mm (11-13/16 inches) or less,
and strength of the mounting section of 2000 N or more when using a commercially available drop
prevention wire. Also, separately prepare the mounting screw matching the mounting specification.
Length of the wire (300 mm) (11-13/16 inches)
6.4 mm (1/4 inches)
4.5 mm (3/16 inches)
Camera side
f Wire length 300 mm (11-13/16 inches): Parts number (DVDW1001ZA)
2 Camera mounting screws (to be obtained by customer): 2
Size: 3/8-16 UNC
Consider the thickness of the camera mounting fixture for the length.
3 Installation side wire mounting screw (M6 or M4) (to be obtained by customer): 2
Use an anchor bolt at the installation location and secure the strength of ten times of the entire weight.
4 Flat washers (to be obtained by customer): 4 (for mounting the camera)
For 3/8 inch screw
5 Spring washers (to be obtained by customer): 4 (for mounting the camera)
For 3/8 inch screw
6 Camera mounting fixture (to be obtained by customer): 1
Prepare the fixture with material and shape that can withstand the entire weight of the camera and the
lens.
6
6.4 mm (1/4 inches)
4.5 mm (3/16 inches)
2 mm (3/32 inches)
Camera mounting fixture
6 to 8 mm (1/4 to 5/16 inches)
11 mm (7/16 inches)
Installation side