Panasonic AU-VREC1 Ürün Yazılımı Güncelleme Prosedürleri - Sayfa 2

Dijital Kamera Panasonic AU-VREC1 için çevrimiçi göz atın veya pdf Ürün Yazılımı Güncelleme Prosedürleri indirin. Panasonic AU-VREC1 5 sayfaları.

2. Preparation

Prepare following equipment and a firmware package prior to update.

Name

SD memory card

Firmware package

(VSI****.zip)

AC adaptor

Computer (PC/Mac)

! Important: Please read before performing update:

For updating, it is necessary to connect Camera module to Recording module.

Update work may take approximately 60 minutes, use secure power supply (AC

adaptor), unexpected shutdown while in update may cause an

unrecoverable failure.

Do NOT eject SD memory card while update is in progress (while access

LED blinks), interrupting communication between SD card and equipment

may cause unrecoverable failure.

3. Updating firmware

[Preparation]

1. Insert an SD memory card into the SD card slot ( NOT microP2 card slot ) on the unit.

2. Format the SD card (MENU : SYSTEM SETTINGS > CARDS/MEDIA > FORMAT CARD > SD CARD)

Visit Panasonic professional video support website <http://panasonic.biz/sav/pass_e> and download

"vsi*****.zip" firmware package.

3. Extract the ZIP package (you will see "PRIVATE" folder).

4. Mount the formatted SD card to the computer then copy the "PRIVATE" folder to the SD card.

Qty

MAX 64GB MIN 256MB

Note: microP2 card can also be used as substitution for SD cards but the

card has to be formatted as SD CARD in the SD card slot in advance.

Can be downloaded at:

Needed for downloading, unzipping, copying firmware package

Extract

Firmware update procedure for Varicam series

Remark

http://panasonic.biz/sav/pass_e

Copy to

ROOT